10pcs 12V cob led car light source 94mm 16w 1600lm cob chip bulbs warm cold nature white blue led cob panel for diy lamp
Mr.white Factary store 94*50mm 12-14V DC 16W COB LED bulb lamp light source with RF controller.
_ Type : Mr.white-9450-0420-16W with RF controller
_ Product Size :94*50mm.
_ Light area : 80*50mm.
_ Power : 16W
_ Forward Voltage(DC) : 12-14V
_ Max Forward Current : 1200mA
_ Emitting color : White(w 6000-6500K), Warm white(w.w 2900-3100k),Nature White(n.w4000-4400k),Blue(b.450-460nm)
_ Luminous Flux :100-110lm/w
_ Viewing Angle : 120 degrees
_ OEM/ODM : We are manufacturers. If you have any need, please contact us. We accept customization.
_ Notice:Please add a necessary heatsink when used.
_ Tips: please use this product as required below.
1. Dimmer & Dynamic 2. 8 Dynamic Effects
3. 10-level Dimmer 4. 256-Grade PWM
5. Speed Adjustable 6. Card Type Remote
7. Ultra Slim Design 8. Smooth Dimmer Effect
9. 1 to 1 Remote Paired 10. Auto Save Function
Press this key to turn on unit or switch to standby mode.Unit will turn on and restore to previous status at powering on moment.
Switch to lighting mode from dynamic mode.
3/8/9. Dimmer Adjust Shortcuts
Switch to 100%,50%,or 25% brightness lighting mode.
4/6. Dynamic Mode Adjust
Switch to dynamic mode from lighting mode,or switch between different dynamic modes.
5/7. Speed Adjust
Adjust playing speed of dynamic modes.Press SPEED+ to increase speed and press SPEED- to decrease.
10/11. Brightness Adjust (Dimmer)
Adjust lighting mode brightness.Press BRIGHT+ to increase brightness and press BRIGHT- to decrease.
This unit accepts DC 12V to 24V power supply.The red cable should be connected to positive and black cable to negative.Please select proper power supply according to the LED application.
The red cable should be connected to LED positive and black cable to negative.The peak output current is 6A,please reduce load if main unit is overheating.
CAUTION!Do not short circuit the LED output,this may lead to permanent damage!
Please pull out the insulate part before using.The RF wireless remote signal can pass through barrier,so it’s not necessary to aim at the main unit when operate.For proper receiving remote signal,do not install the main unit in closed metal parts.The remote battery is 3V CR2025 type,please only replace with same type battery.